Instruction Manual

760004-A February 2002

Model NGA 2000 HFID

Replacing Front Panel Components

1.To access components, remove the four front panel mounting screws (two on front, one on each side).

2.Remove the burner air regulator and fuel regulator mounting nuts.

3.Remove the purge air regulator mounting bracket screws.

The front panel can now be pulled away from the chassis.

NOTE

The wiring from front panel components is still connected. Do not disconnect unless replacing that component.

Front panel mounting screw

Front panel

(opposite side also)

mounting screws

Figure 4-21. Accessing Front Panel Components

4-24

Maintenance and Service

Rosemount Analytical Inc. A Division of Emerson Process Management