Empire Comfort Systems PV-28SV50-B(N,P)-1 Pedestal Installation Instructions

PEDESTAL INSTALLATION INSTRUCTIONS

Optional Pedestal Assembly Installation

1.Remove pedestal assembly from carton. Handle pedestal with care to avoid paint damage.

2.Place pedestal assembly into position where heater is to be located.

3.Lift and place main body of heater on top of pedestal assem- bly and align main body of heater with locating tabs provided on pedestal assembly (refer to diagram).

NOTE: To avoid accidents and damage to main heater body and paint-work, it is recommended that main body of heater should be located on top of pedestal assembly by 2 peo- ple.

4.Secure pedestal assembly to main body of heater with three

(3) 1/2”- 10 x 24 screws supplied (refer to diagram).

Figure 59

Note: Use the three (3) 1/2”- 10 x 24 screws and washers provided to secure pedestal assembly to base of heater.

24820-1-0409 Page 49