6.2Control Panel
Inverter Start Up
This allows the user to turn on and reset the inverter. This is normally only used when starting the 
UPS.
Inverter Shutdown
The switch incorporates a safety feature to prevent inadvertent operation yet still allow rapid 
shutdown in the event of an emergency. This is achieved by the requirement that the switch be
depressed for 2 seconds before the inverter stops during which time the audible alarm will be
heard.
Audible Alarm Cancel Switch
This switch cancels the audible alarm. When pressed the red warning light goes from continuous 
illumination to flashing on and off.
Page Right Control
This switch changes the page headings displayed on the | LCD. | It also allows the alarm and |
measurement statuses to be stepped through when examining the power history (refer to section | ||
10.6) |
|
|
Record Up
This switch changes the record displayed on the LCD to the previous message displayed. When | the |
top of the page has been reached the display will no longer scroll. |
|
Record Down
This switch changes the record displayed on the LCD to the next record on the page. When the 
bottom of the page has been reached the display will no longer scroll.
page 40
