Batch Scanning Photos and Film

If you’re working with photos or film, you can place multiple images on the scanner, and then scan them all at once (instead of one-by-one) with EPSON Scan. This lets you quickly digitize large numbers of images.

Note: If you have the Photo version of the scanner, you can use the LaserSoft Imaging SilverFast Job Manager for high-capacity batch scanning. For details, see the on-screen guide included with the software.

To scan multi-page documents, such as reports, use the optional ADF (see page 55).

Placing Your Photos

1.Raise the scanner cover and place your photos face-down on the glass. Be sure to leave a space of at least 3/4 inch (20 mm) between each of the photos.

Note: If you’re scanning film, see page 48 for instructions on using the transparency unit and film holders.

2. Close the document cover, being careful not to move your photos.

Tip: If the edges of your photos don’t scan properly, move them in about 1/16 inch (1.5 mm) from the edges of the glass.

Getting the Most From Your Scanner 39