6.Place the transparency guide at the back edge of the document glass, so

that its alignment pins fit into the holes as shown.

Placing Standard Film Sizes on the Scanner

Use the film holders that came with the transparency unit to scan 35 mm slides, filmstrips, negatives, 4 × 5 inch film, and medium format (120, 220 and 6 × 12 cm) film.

1.Place the film holder on a flat surface. Open its cover (if it has one), then load the film with its shiny side face-down and the film emulsion layer face-up.

L40016

35 mm slides

35 mm strips

4 × 5 inch film

Medium format film

Using Optional Equipment 49