Installing the Automatic Document Feeder

Note: The automatic document feeder (ADF) is heavy, so be sure to have someone help you with this procedure. Also, because the document feeder is large, leave adequate space around the scanner for handling it.

1. Make sure your scanner is turned off, then unplug the power cord from the scanner.

2. Fully open the scanner’s document cover, then lift it straight out.

3.Insert the installation screws that came with the ADF into

the holes in the back of the scanner, then secure them with the included screwdriver tool.

4. Attach the two smaller feet to the ADF as shown.

56 Using Optional Equipment