You can scan your document in either Office Mode (for text and business documents) or Professional Mode (for photos and other graphics). See page 21 for instructions on scanning a document for OCR.
Note: Do not feed valuable photographs or artwork into the ADF; misfeeding could result in wrinkling or damage. Instead, place such items individually on the scanner glass.
To scan an individual document while the ADF is attached, just lift the ADF and place your document
See Chapter 1 for basic scanning instructions, and follow these guidelines:
■For the Document Source setting, select ADF -
ADF -
■When scanning
■If you want to scan only part of each page, load the first page only. Click the Preview button. The first page is scanned and ejected. Adjust the marquee in the Preview area to select just the area you want to scan (see page 16), then load your entire document (including the first page). When you click Scan, the scanner scans only the selected area for all pages of your document.
■When you scan
■You can scan documents whose pages vary in length, but they must all be the same width, and you cannot preview them. After arranging your documents into a stack, hold the stack upright and tap it several times on your desk to even up the bottom edge. Load the stack into the scanner
In Office Mode, set the Document Size setting to Auto Detect. Scan your document by clicking the Scan button (do not click Preview).
60 Using Optional Equipment