Follow these steps to load a document:

1.Arrange the pages of your document into a stack. If necessary, slide the edge guide out of the way, then place the stack face-up on the ADF’s input tray. Insert it short end first until it meets resistance. Do not force it into the ADF.

Portrait

 

 

 

Landscape

 

 

 

 

 

A

Insert left

 

 

A

 

edge first

 

 

 

 

 

Insert bottom edge first

2.Slide the edge guide flush against the stack, but not too tightly. If your pages are long, you may need to extend the paper support.

Extend paper support for long pages

3. Scan your document as described in the next section.

Note: Pages are fed from the top and ejected face-down, keeping them in their original order.

Using Optional Equipment 59