The scanner doesn’t scan your image.

Make sure the scanner is ready to scan. Wait until the Ready light stops flashing and remains on.

Check the Windows Device Manager. If there are any

Unknown Device icons, select them and click Remove or

Uninstall.

If you’re using imaging software, such as Adobe Photoshop Elements, make sure you select

EPSON Expression 10000XL as your scanner or import source.

Make sure you have enough memory to scan your image. If you’re scanning a large image or scanning at a high resolution, close any unnecessary programs. Try scanning at a lower resolution, or select part of the image to scan. If you still cannot scan, you may need to upgrade your RAM.

If you’re using the optional automatic document feeder, run EPSON Scan in Office Mode or Professional Mode, and select

ADF - Single-sided or ADF - Double-sided as the Document Source. Also, make sure the original document is inserted face-up.

Pages jam in the automatic document feeder.

Remove the jammed pages, following the instructions on page 61.

The automatic document feeder is running too slowly.

Check the high-speed switch and make sure it’s in the upper position (see page 57).

You cannot scan film with the transparency unit.

Make sure the reflective document mat is removed.

Make sure the tranportation lock on the TPU is turned to the Unlock position (see page 47).

The scanner doesn’t start when you press the a Start button.

In Windows, check the Events tab in the scanner’s Properties window. Make sure Take no action or Disable device events is not selected.

On Macintosh systems, the

a Start button opens EPSON Scan. You cannot assign another application to it.

72 Solving Problems