■Macintosh PowerPC® or Intel® Core™ processor (500 MHz or faster recommended)
■OS X 10.2.8, 10.3.9 to 10.4.x
Note: Check the Apple website for any updates to your operating system. Fast User Switching is not supported for Mac® OS X 10.3 and above.
■USB (1.1 or 2.0) or IEEE 1394 (FireWire) port. To use the scanner’s optional network card, your computer must be connected to an existing network using TCP/IP.
IEEE 1394 requires
■128MB RAM (512MB RAM recommended)
■300MB available hard disk space
■
■VGA color monitor with 800 × 600 screen resolution (1024 × 768 or higher recommended)
■
Important Safety Instructions
Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner.
■Unplug the scanner before cleaning. Clean with a damp cloth only. Don’t spill liquid on the scanner. Use a soft, dry cloth or a compressed air spray designed for cleaning electronic equipment to clean dust from the document table glass.
■Do not place the scanner on an unstable surface or near a radiator or heat source.
■Use only the power cord that comes with this product. Use of another cord may result in fire or electric shock.
■This product’s power cord is for use with this product only. Use with other equipment may result in fire or electric shock.
■Use only the type of power source indicated on the scanner’s label, and always supply power directly from a standard domestic electric outlet with a power cord that meets the relevant local safety standards.
■Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
■Do not let the power cord become damaged or frayed.
86 Requirements and Notices