Cl Never use a stand that tilts the printer. It should always be kept level.
Cl Place cables so they do not interfere with paper feeding; secure them to a leg of the stand if possible.
Plugging in the Printer
1.Make sure that the power switch is turned off. It is off when the “G” side of the switch is pressed down.
2.Check the label on the back of the printer to make sure the voltage required by the printer matches that of your electrical outlet. Also, make sure that you have the correct power cable for your power source.
Caution:
It is not possible to change the printer‘s voltage. If the rated voltage and your outlet voltage do not match, contact your dealerfor assistance. Do not plug in the power cord.
3.If the power cord is not attached to the printer, connect it to the AC inlet on the back of the printer.
4.Plug the power cord into a properly grounded electrical outlet.