Labels

Only use labels mounted on a continuous backing sheet with tractor sprocket holes. Do not try to print labels on single sheets; labels on a shiny backing sheet may not feed properly.

You load labels the same way as continuous paper, except you turn the paper-thickness lever clockwise as far as it will go.

Caution:

El Ll Neverfeed labels backzoard by pressing the LOAD/EJECT button. They call easily peel off the backing and jam the printer.

I-1Make sure the tear-off mode is set to offin the default settings mode when using labels.

Ll Use labels under normal operating conditions only because they are sensitive to extreme temperature and humidity.

c-lDo not leave labels loaded in the printer between jobs; they nmy jam zclhen you resume printing.

To remove labels from the printer, follow the steps below.1.Tear off the labels at the rear of the printer.

2.Press the LOAD/EJECT button while holding down the ALT button to advance the remaining labels out of the printer.

2-18 Paper Handling