qCaution:

U Never use alcohols or fhimers to clean the prinfer; these chemicals cm damage the components as well as the case.

ELI Be careful roof to get wafer on the prinfcr mechanism or clectrotzic components.

‘J Do not use a hard or abrasive brush.

NJ Do not spray the inside (If the printer with lubricants; umuitable dils cau damage the mchanism. Contact your dealer or a qual$ied service person if lubrication is needed.

Transporting the printer

If you need to transport your printer some distance, carefully repack it using a box and enough packing materials to prevent damage to your printer, as described below:

1.Open the printer cover and make sure that the print head is capped in the far right position. If it is not capped, turn on the printer to cap it. Then, turn off the printer.

2.Remove the paper separators from the printer. Then, remove the paper support.

3.Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer.

4.Remove the paper from the paper feeder and attach the protective material to the printer. Repack it in a box.

qCaution:

3 Do mf renmue the ink cartridge when you tramport your printer.

‘-I Keep the printerflat in the box during transport.

If the print quality is poor after transport, clean the print head. See “Cleaning the Print Head.”

Using the Printer 3-21