After you charge the ink delivery system, you can use the built-in self test to make sure the printer is working properly. You can run the self test with paper from the built-in paper feeder or by feeding a sheet manually. This section describes loading paper in the paper feeder.

1.Open the paper feeder cover while holding up the lever on

2.Slowly slide the right edge guide as far to the left as it will go, and align it to the guide mark. Then adjust the left edge guide to match the width of your paper. You may also use the guide mark for A4 size paper (or letter /legal size paper for the U.S. version). When you load paper 420 mm (16.5 inches) wide, move the right edge guide as far to the right as it will go.

420.mm wide paper

C : Letter landscape

D :A4 landscape

E : Legal landscape

F : B4 landscape

Setting Up the Printer 1-13