1.If any printed sheets remain in the printer, tear off the printed pages.

2.Press the LOAD/EJECT button. The printer feeds the continuous paper backward to the paper-park position.

R Caution:

U Always tear offpaper before back-feeding; back-feeding too many sheets can cause a paper jam.

0Nezler back-feed labels. Labels call easily come qf their backing and jam the printer.

3.Move the release lever to the single-sheet position.

Note:

If the prilz ter beeps, raise the release lever and press the LOA D/EJECT button to feed the paper backwnrds to the paper-park position. You can thcrz lower the lever again.

4.Attach the paper separators as shown on page l-6.

5.The printer is ready to print. When it receives data, it loads a single sheet from the paper feeder or manual feed slot.

Switching to continuous paper

To switch from single sheets back to continuous paper, follow the steps below.

1.If a single sheet is in the paper path, press the LOAD/EJECT button to eject it.

2.Raise the release lever to the continuous-paper position.

Note:

lf the pri/l ter beeps, lower the release leuer and press the LOAD/EJECT button to eject the paper. Then raise the lever again.

Paper Handling 2-15