The computer and printer interface settings may not match. Make sure the settings on the computer and printer match.

The interface may have been disabled. Make sure that the switch near the interface connector is turned on.

Single sheets do not feed properly from the paper feeder.

Too many sheets are loaded in the paper feeder. Remove the paper from the paper feeder and reload the paper no higher than the mark on the edge guide.

The paper is too thick or too thin to be fed. Make sure the paper is within the specifications. Some paper types require manual feeding. See “Technical Specifications” in the Appendix.

Check that the release lever is in the single-sheet position when using the push tractor.

The paper-feeder cover may be opened. Close the paper-feeder cover.Paper may be jammed near the print head.The printer loads more than one sheet at a time.

The paper is too thin. Make sure the paper is within the specifications. See “Technical Specifications” in the Appendix.

Using the Printer 3-29