If You’re Running Windows 98 . . .

You may be asked to insert your Windows 98 operating system CD-ROM during the scanner installation. Please have this CD-ROM handy, in case it is needed. If you don’t have your Windows CD-ROM, see page 57 in “Problem Solving.”

1.Make sure your scanner is plugged into a power source and connected to your computer; then turn on your computer. The Add New Hardware Wizard screen appears.

2.Insert the scanner software CD-ROM in the CD-ROM or DVD drive, then click

Next.

3.Select Search for the best driver for your device, then click Next.

4.Check only the Specify a location checkbox, then click Browse.

8 Setting Up Your Scanner