Epson 3260 paper, Switching to continuous paper, paper-part, pap-release, paper-release, paper-release, If you raise the, 2-14 Paper Handling

Caution:

If you lower the paper-release lever while continuous paper is still loaded, the printer beeps and the READY light goes off. If this happens, raise the pap-release lever and press the FF and FONT buttons at the same time to reverse the paper to the paper-part position. You can then lower the lever again.

3.The printer is ready to print. When it receives data, it automatically loads a single sheet from the paper cassette and begins to print.

Switching to continuous paper

To switch from single sheets back to continuous paper, follow these steps:1.If a single sheet is in the paper path, p&s the FF button to eject it.2.Push the paper-release lever firmly into the continuous-paper position.

Caution:

If you raise the paper-release lever when a single sheet is in the paper path, the printer beeps and the READY light goes off. In this case, lower the paper-release lever and press FF to eject the page completely. You can then raise the lever again.

3.The printer is ready. When the printer receives data, it loads continuous paper from the push tractor automatically and begins to print.

2-14Paper Handling