6.Note that the printer prints on the underside of the paper. Make sure your paper has a clean, straight edge. Fit the first three holes of the paper over the sprocket pins, and then close the sprocket covers. Slide the left sprocket unit to remove any slack in the paper. Then push the lock lever down to lock it in place.

7.Turn on the printer. It advances the paper to the loading position automatically upon receiving data.

Note:

If the printer runs out of paper during a print job, load additional paper on the push tractor and then press the FF button.

Tips for using continuous paper

If you want to change the top-of-form position permanently, adjust it with the default-setting mode as described in Chapter 3.

Paper Handling 2-9