Transporting the printer
If you need to transport your printer some distance, carefully repack it using the original box and packing materials as described below:
1.Turn off the printer.
2.Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer.
3.Remove the output guide.
4.Remove the optional push tractor, if installed.
5.Remove the ribbon cartridge.
6.Repack the printer, ribbon cartridge, output guide, and power cord in the original packing materials and place them in the printer's originalbox
T r o u b l e s h o o t i n g
Most problems you may encounter while operating your printer have simple solutions. Read this section if you have a p r i n t e r p r o b l e m .
You can check the operation of your printer using the self test See “Running the Self Test” in Chapter 1. If the self test works properly, the problem probably lies in computer, the software, or the interface cable. If the self test does not work, contact your dealer or a qualified service person for assistance.