The typestyles or characters you selected with your software are not printed

Check that the software is correctly configured for your printer. For instructions, see Chapter 1.

The font selected on the control panel does not print.

Your software may be overriding your control panel setting. Check the font sitting in your application program.

The wrong characters are printed

The wrong character table is selected. Check the default character table setting as described in ‘Changing the default settings" on page 3-7.

Printing starts too high or too low on the page, or the bottom part of one page is printed at the top of the next page.

Reduce or eliminate the top margin with your application software.

Use your application software to specify the type of paper you are using (single sheet or continuous) and to set the lines-per page setting. These settings take into account the different requirements of the two printing methods.

Change the TOF position in the default-setting mode. See "Changing the default settings" on page 3-7.

Also, it is possible to open the printer cover and turn the gear

to make minor adjustments to the loading position for the current page only. See Chapter 2.

3-20 Using the Printer