Each time you turn on the printer with paper loaded, it reverses the continuous paper to the paper-park position and then advances it to the next top of form. Always remove your printed sheets before you turn off the printer to keep the top-of-form position accurate.

You can adjust the top-of-form position temporarily. Open the printer cover and turn the gear marked by + and - signs to adjust the position. This adjustment is lost when you turn off the printer or feed the paper backward to the paper-park position by pressing the FF and FONT buttons at the same time.

Using the fear-off feature

When you use continuous paper, the tear-off feature makes it easier to tear off the last printed sheet and saves the paper normally lost between documents.

Note

You can tell the printer to feed the perforation of your paper to either the edge of the printer cover or approximately eight centimeters (three inches) beyond by setting the tear-off feature as described in Chapter 3.

2-10Paper Handling