All the text is printed on the same line.
Set the auto line feed to on in the default-setting mode so the printer adds a line-feed code to each carriage return. See “Changing the default settings” on page 3-7.
The text is printed with extra blank lines between the lines of text
Two line-feed signals are being sent. Set the auto line feed to off in the default-setting mode. See “Changing the default settings" on page 3-7.
Line spacing is incorrect. Adjust the line-space setting in your application software.
Page length does not match the length of the paper.
Check the page length set by your application software and adjust it if necessary.
If you are using continuous paper, change the page length in the default-setting mode. See “Changing the default settings” on page 3-7.
Regular gaps occur in the printout.
One-inch ship over perforation may be set. Set the skip over perforation to off in the default-setting mode. See “Changing the default settings” on page 3-7.
Vertical printed lines do not align.
Set the graphic print direction to Unidirectional for unidirectional printing in the default-setting mode. For instructions, see “Changing the default settings” on page 3-7.