Changing the default settings

If you need to change default settings that cannot be changed by using your software program, you press the control panel buttons, and the control panel lights show your selections.

Follow the steps below to make your changes:

Note:

You can repeat steps 5 through 7 if you want to make more than one change. Also, you can turn off the printer and start over if you are not sure about a setting.

1.Make sure the printer is turned off and paper is loaded in the paper cassette. If you installed the optional push tractor, you can use continuous paper for the default-setting mode.

2.To enter the default-setting mode, hold down the FONT button while you turn on the printer.

The printer automatically loads a sheet of paper and prints out instructions and a table showing you the languages from which you can choose. You can print the default-setting mode messages in English, French, German, Italian, or Spanish.

Using the Printer 3-7