See the following tables in this section.

For example, if you want to change the character table, press the FONT button until the left FONT light is flashing and the right FONT light is on.

6.Press the FF button to change the setting. The READY light turns on or off to show your selection, as indicated above. Your new setting is saved automatically and remains in effect until you change it

If you are changing the character table, page length, or TOF (top-of-form) position, go to step 7 next. Otherwise, go to step 8.

7.If you are changing the character table, page length, or TOF position, you must make additional changes as shown in the tables below. Press the FF button until the set of lights

(the FONT lights and the READY light) indicate your selection. Then press the FONT button to set the setting.

Using the Printer 3-9