Epson 3260 Appendix A-11, viewed from the printer, times of each signal must be less than 0.2 u.s

Note:

The column heading "Direction" refers to the direction of signal flow as

viewed from the printer.

"Return" denotes the twisted-pair return, to be connected at signal ground level. For the interface wiring, be sure to use a twisted-pair cable for each

signal and to complete the connection on the return side.

All interface conditions are based on the TTL level. Both the rise and fall

times of each signal must be less than 0.2 u.s.

Data transfer must be carried out by observing the ACKNLG or BUSY signal. Data transfer to this printer can be carried out only after receipt of the ACKNLG signal or when the BUSY signal is LOW.

Appendix A-11