You can also change the image size by moving the projector closer to or farther away from the screen. You can use the E-Zoombuttons on the remote control to zoom in on a portion of the image. See page 42 for instructions.

Adjusting the Height of Your Image

If the image is too low, you can raise it by extending the projector’s feet.

1.Stand behind the projector. Press the blue foot release levers on each side and lift the front of the projector. This unlocks the feet.

Foot

2.Once the image is positioned where you want, release the levers to lock the feet in position.

3.To fine-tune the height of the image, rotate the projector’s feet.

If the image is no longer rectangular after raising it, see the next section.

34Using the Projector