3.Use the directional buttons and press Enter to select any of the following options:
■Position
Press and hold one of the directional buttons to move the image on the screen left, right, up, or down.
■Tracking (computer images only)
Removes unwanted vertical lines from a computer image by matching the projector’s internal clock to various computer signals. See page 80 for more information about adjusting the tracking.
■Sync (computer images only)
Corrects fuzziness or screen flicker by synchronizing the projector with the tracking signal sent from the computer. See page 80 for more information about adjusting the sync setting.
■Brightness
Lightens or darkens the overall image.
■Contrast
Adjusts the difference between light and dark areas.
■Color (video only)
Adjusts the depth or intensity of the image.
■Tint (video only)
Adjusts the balance of green to magenta in the image.
■Sharpness
Sharpens or softens the image.
■Color Mode
Corrects the vividness of image color. You can select from the following six settings, and save a different one for each computer and/or video source:
Dynamic: For projecting movies in vivid color in bright rooms
Presentation: For presentations in bright rooms
note
If you have repositioned the image but then change your mind, you can press the Auto button on the remote control to restore the default settings.
note
You can also select High Brightness or Low Brightness mode in the Advanced menu. See page 54.