Adjusting the Image Shape
The projector automatically corrects images that are distorted when the projector is tilted up or down (up to a 15° tilt). The Keystone window appears on the screen while the projector makes the correction. If the projected image still isn’t rectangular or has a “keystone” shape, do one or more of the following:
■If your image looks like 
or 
, you’ve placed the projector off to one side of the screen, at an angle. Move it directly
in front of the center of the screen, facing the screen squarely.
■If your image looks like 
or 
, the Auto Keystone feature may have been disabled or you may need to manually adjust the
keystone correction value. (Auto Keystone is not available when you’re using ceiling or rear projection.) Follow the directions below:
■To turn on Auto Keystone, press the Menu button on the remote control. Use the 
directional button to select the
Setting menu, then press Enter. If Auto Keystone is OFF, press 
to highlight this option and press Enter. Select ON in the Auto Keystone window that appears and press Enter to save your changes. Exit the menu by pressing the Menu button.
■To manually adjust the keystone correction value, press the
or 
side of the Keystone button on the projector to correct the shape of the image. After correction, your image will be slightly smaller.
You can also make keystone adjustments using the projector’s Setting menu. See page 52.
Menu
Enter | Directional buttons |
Using the Projector 35