note
The Startup Screen option cannot be turned off if the User’s Logo Protect feature has been turned on. See page 59.
3.Press Enter and use the directional buttons and the Enter button to set the following options:
■Brightness Control
Select Low lamp brightness when the projection is too bright for the room. The Low setting also reduces the electricity consumption and fan noise. Select High to project the maximum brightness. (Also check the Brightness setting in the Image menu; see page 49.)
■Startup Screen
Turn on to display the image or logo you have captured whenever the projector is turned on. See page 56 for more information.
■Color Adjustment
Color Temp: Adjusts the whiteness of the screen.
RGB: Adjusts the individual RGB values.
■Projection
Front: Projector is in front of the screen
Front/Ceiling: Projector is in front of the screen, mounted
Rear: Projector is behind the screen
Rear/Ceiling: Projector is behind the screen, mounted
■COM Port
Turn on USB only if you’re controlling the projector from a computer with the EMP Link 21L software. This software can be downloaded from the EPSON website at support.epson.com. (You must turn the projector off and then on again to use the new setting.)
■Language
Select from nine languages to be used for the projector menus.
4.When you’re finished, press Esc or Menu.
54