Power | Warning |
|
|
light | light | Status | Description |
|
|
|
|
— | Flashing red at | Internal error | There is an internal error in the projector. Turn |
|
| the projector off and unplug it. Contact EPSON | |
| intervals |
| for help. |
|
|
|
|
— | Flashing red at | Lamp failure | The lamp is burned out, broken, or not installed |
|
| correctly; or the lamp cover is open. Close the | |
| intervals |
| cover or replace or reseat the lamp, if |
|
|
| necessary, as described on page 67. If you |
|
|
| need to replace the lamp, see page 67. |
|
|
|
|
— | Red | Overheating | The projector has overheated and turned itself |
|
|
| off. Let it cool for a few minutes, then turn it |
|
|
| back on. Make sure there is plenty of space |
|
|
| around and under the projector for ventilation. |
|
|
| Also clean the air filter. See page 65. If it |
|
|
| continues to overheat, you may need to |
|
|
| replace the air filter. |
|
|
|
|
— | Flashing orange | High | The projector is too hot. Make sure the |
| (quickly) | temperature | temperature surrounding the projector does |
|
| warning | not exceed 95 ° F (35 ° C) and there is plenty of |
|
|
| space around and under the projector for |
|
|
| ventilation. Clean the air filter, if necessary. |
|
|
| See page 65 for instructions. |
|
|
|
|
Orange | Off | Standby (sleep) | The projector is in standby or sleep mode. You |
|
| mode | can unplug it or press the P Power button to |
|
|
| turn it on. |
|
|
|
|
Flashing green | Off | Warming up | The projector is warming up. Wait for the |
|
|
| image to appear. |
|
|
|
|
Green | Off | Operating | The projector is operating normally. |
|
|
|
|
Flashing orange | Off | Cooling down | The projector is cooling down. Wait for the light |
|
|
| to stay lit orange without flashing before |
|
|
| unplugging it. |
|
|
|
|
74Solving Problems