6.Use the screwdriver to loosen the two screws holding the lamp in place. The screws are deep inside the projector on the sides of the lamp. (You can’t remove the screws.)
warning
This product includes a lamp component that contains mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put it in the trash.
Don’t remove these screws
7. Hold the lamp by the top, as shown, and pull it straight out.
caution
Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.
8. Gently insert the new lamp as shown below.
9. Once the lamp is fully inserted, tighten its screws.
68Maintaining and Transporting the Projector