caution
To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange.
3.Press the P Power button again. The lamp is turned off and the power light flashes orange for about 20 seconds as the projector cools down. When the projector has cooled, the light stays orange and the exhaust fan shuts off.
If you want to turn the projector on again, wait until the orange light stops flashing. Then press the P Power button.
4.Retract the front feet as shown.
5.Replace the lens cap and unplug the power cord.
6.Turn off and disconnect any equipment plugged into the projector.
7.If you won’t be using the projector for a while, store it in the soft case that came with it or in a protective case.
38Using the Projector