10. Position the lamp cover so the arrows on the lamp cover align with the arrows on the projector. Then slide in the cover until it clicks into place.
1
2
11. Reset the lamp timer as described below.
Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear the Lamp Replace warning message. Follow these steps:
1.Connect the power cable and turn on the projector.
2.Press the Menu button on the remote control and select the Info menu. Then press Enter. You see the following:
note
Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used.
Maintaining and Transporting the Projector 69