Controlling the Picture and Sound

You can use the remote control to select your source, temporarily turn off the picture and sound, freeze the action, or zoom in on the picture. Make sure you have set up your projector and connected any equipment as described in Chapter 1.

Switching Between Picture Sources

If you’ve connected your projector to more than one computer and/or video source, you can use the buttons on the remote control to switch between the different sources.

■Press the Computer1/2 button to select the computer or video source connected to the projector’s Computer1/Component Video1 or Computer2/Component Video2 port.

■Press the S-Video/Videobutton to select an S-Video or standard composite video source.

After you select a source, the screen goes dark for a moment before the image appears. The name of the selected source (such as Computer1 or S-Video) appears briefly on the screen.

Select the S-Video or Video source

Select the computer or RGB (component) video source

Using the Remote Control 41