Check the items you want to install; ELP Link III V2.0 must be installed, but the User’s Guide and Acrobat Reader are optional.
7.Click Install to install the software on your hard disk.
8.When installation is complete, click Quit. If you are installing Acrobat Reader, you see the Acrobat Reader 3.0 Installer screen.
9.Click Continue. You see the software license agreement for Acrobat Reader 3.0.
10.If you don’t want to install Acrobat Reader, click Decline. Otherwise, click Accept and follow the instructions on screen.
11.When installation is complete, restart your computer.
Starting ELP Link III
Before you start the ELP Link III program, make sure you’ve done the following:
pConnected the necessary cables and installed the ELP Link III software
pTurned on both the computer and projector p Disabled any screen savers
Note: You can also run the software without the projector, although you can’t change projector settings or perform certain other tasks. See “Bringing out detail in your projected image” on page 128 for details.
98 | 4 • Using ELP Link III |