Connecting the projector’s mouse cable
Connect the Macintosh mouse cable that came with your projector if you want to use the projector’s remote control as a mouse pointer for your Macintosh.
Note: If you’ll be using the optional ELP Link III software, you need to connect the Macintosh mouse cable included in the ELP Link III kit instead. See Chapter 4 for instructions.
Mouse/Com port
Mac mouse cable
1.Connect the small end of the projector’s Mac mouse cable to the mouse port on your PowerBook.
2.Connect the cable’s other end to the projector’s Mouse/Com port.
42 | 1 • Setting Up the Projector |