Adjusting Video Settings (Image Source = Video)

You can adjust the projected image by using the Video menu. The following options are available when the image source is Video.

Note: The projector’s image source must be set to Video, and the video source (such as a VCR or camcorder) must be connected and operating for you to access these menu options (for example, the projector must actually be projecting an image from a video tape, if you’re using a VCR). To change the image source on the projector, press the Source button on either the remote control or control panel.

Menu item

Description

 

 

Brightness

Lightens or darkens the overall image. Increase brightness to lighten an

 

image, or decrease it to darken the image.

Contrast

Adjusts the difference between light and dark areas. Increase the

 

contrast to make light areas lighter and dark areas darker. Decrease it to

 

minimize the difference between light and dark areas.

Color

Adjusts color density. Increase the setting for darker and more opaque

 

colors. Decrease it for lighter and less opaque colors.

Tint

Adjusts the red-green color balance of the screen. Increase tint to add

(NTSC only)

more green, or decrease it to add more red. This setting only works with

 

NTSC video signals.

Sharpness

Adjusts the sharpness of the screen image.

 

 

74

3 • Adjusting Projector Settings