wThe power light is flashing orange and you can’t turn the projector on.
The projector is cooling down. Wait until the light stops flashing and then turn the projector on.
wThe projector screen is blank and the lamp is off.
If there is no video signal for 30 minutes, the projector goes into sleep mode. To resume, make sure the video signal is active and then press the Power button.
wThe power light doesn’t come on.
Turn the projector off, check that the power cable is securely connected both at the electrical outlet and the projector, and press the on/off switch at the back of the projector and then press the Power button.
wProjected images get darker or start to deteriorate, or the projector lamp light is red.
Replace the projector lamp as described in “Replacing the Lamp” on page 134.
wThe temperature light is red.
The projector is overheating, which turns the lamp off automatically. Let the projector cool for a few minutes, then turn it back on. Make sure nothing is blocking the ventilation vents.
The air filter may be clogged. Clean it as described in “Cleaning the Air Filter” on page 133, then let the projector cool for awhile.
Problems with the Projector | 143 |