The Setting tab enables you to adjust basic projector settings.
Option | Description |
|
|
| |
Blank | Specifies whether a black screen, a blue screen, or a | |
(AV/MUTE) | displays when the screen is blanked. | |
Install | Specifies how the projector is installed (if you are not using front | |
| projection): |
|
| Rear Proj | Use this setting when projecting to the back of a screen so |
|
| the image is flipped left to right. |
| Ceiling | Use this setting when the projector is installed on the ceiling |
|
| so the image is flipped top to bottom. |
Prompt | Temporarily displays a prompt on the projector screen identifying | |
| which source (computer or video) is providing the image. | |
Color Temp | Adjusts the whiteness of the screen. Positive color temperature values | |
| provide a cold white; negative values provide a warmer white. Press the | |
| right arrow button on the control panel or press right on the remote’s | |
| pointer button to increase the color temperature value; press the control | |
| panel’s left arrow button or left on the remote’s pointer button to | |
| decrease the color temperature value. | |
Mode | Specifies the input image signal mode: AUTO, NTSC, NTSC 4.43, | |
| PAL, PAL N, PAL M, PAL 60 or SECAM. | |
Pattern | Enables or disables display of the test pattern currently selected. | |
Display |
|
|
Reset | Resets all settings to their default values. | |
|
|
|
122 | 4 • Using ELP Link III |