3.Press the Power button on the remote control or the control panel on top of the projector. The power light flashes green as the projector warms up. When the projector is fully warmed up, this light remains green.
If computer or video equipment is attached, the computer or video signal is projected. Allow about 30 seconds for full illumination.
Warning: Never look into the lens when the lamp is on. This can damage your eyes. It is especially important that children not look into the lens.
When you want to stop projecting images, press the Power button again. The fan remains on and the power light flashes orange for about two minutes as the projector cools down.
Note: Projecting an image for an extended time may cause an afterimage to appear on the screen.
power light
projector lamp light
temperature light
50 | 1 • Setting Up the Projector |