Epson 7550C Connecting the projector’s mouse cable

Connecting the projector’s mouse cable

Connect the projector’s PS/2 mouse cable if you want to use the projector’s remote control as a mouse pointer for the computer.

Note: If you’ll be using the optional ELP Link III software, you need to connect the mouse cable included in the ELP Link III kit instead. See Chapter 4 for instructions.

Mouse/Com port

PS/2 mouse cable

1.Disconnect the computer’s PS/2 mouse cable from the mouse port on the back of your computer and replace it with the small end of the PS/2 mouse cable that came with the projector.

2.Connect the other end of the PS/2 mouse cable to the projector’s Mouse/Com port.

26 1 • Setting Up the Projector