Connecting the projector’s mouse cable
Connect the Macintosh mouse cable that came with your projector if you want to use the projector’s remote control as a mouse pointer for your Macintosh.
Note: If you’ll be using the optional ELP Link III software, you need to connect the Macintosh mouse cable included in the ELP Link III kit instead. See Chapter 4 for instructions.
Mouse/Com port
mouse cable
1.Disconnect your Macintosh’s mouse cable.
2.Connect the small end of the mouse cable that came with your projector to the mouse port on your Macintosh.
3.Connect the other end of the projector’s mouse cable to the Mouse/Com port on the projector.
36 | 1 • Setting Up the Projector |