Setup Guide

Testing the Printer

If you want, you can run a test on your printer to see how it’s working. Follow the steps in Chapter 6 of your printer User’s Guide.

Turn off the printer to stop test printing.

Connecting the Printer to Your

Network

You can connect your Ethernet-ready printer to either an Ethernet Thin Coaxial (10BASE2) or an Ethernet Twisted-Pair (10BASE-T) network connection. You can only attach one cable at a time. Follow these steps:

1.Attach the network cable to the appropriate connecter on the card.

status

sheet button

twisted-pair

thin coaxial

(10BASE-T)(10BASE2)

2.To initialize the card, plug the printer into an electrical outlet while pressing the status sheet button. Hold down the button for about three seconds.

3.To print a status sheet, turn on the printer and press the status sheet button again. This sheet gives you important information including the serial number and hardware address of the card. Keep the status sheet so you can use it when you configure the card.

8