Setup Guide

6.Follow the instructions on the screen, inserting the requested diskette or CD-ROM if necessary.

When setup is complete, the Network Services tab or Network Settings dialog box reappears.

7.In Windows NT 4.x, make sure Microsoft TCP/IP Printing appears in the Network Services list, select it, and click Properties. The Microsoft TCP/IP Properties dialog box appears.

In Windows NT 3.5x, make sure Microsoft TCP/IP Printing appears in the Installed Network Software list box, then click OK. The TCP/IP Components box appears.

8.Set the IP address and the subnet mask of the Windows NT server or workstation. If you want to use the gateway (router), set the IP address of the nearest gateway as the default gateway.

9.In Windows NT 4.x, click Yes to restart the computer.

In Windows NT 3.5x, click Restart Now when the Network Settings dialog box appears.

For more information, see your Windows NT documentation. Then follow the instructions below to configure the Ethernet card in your printer.

Configuring the Ethernet Card for TCP/IP

If you’re using Windows NT, follow these steps to configure your printer with EPSON Net!:

1.Double-click the EPSON Net! (NT) icon to start EPSON Net! for Windows.

2.Select the correct serial number for the Ethernet card in your printer (check the printed status sheet to verify this number) and click Open. The IP Config dialog box opens and shows the current IP address.

18