Epson 800N Installing the EPSON Status Monitor 2 Utility

Setup Guide

Caution:

Once you make changes to the Ethernet card, wait for at least five minutes before turning off or restarting your printer.

7.Set the following options in the AppleTalk Configuration dialog box:

◗Available Zone

Select the network zone where you want the printer to appear.

◗Printer name

You can use your printer’s default name or change it. If you have more than one printer of the same type on your network, be sure to give them unique names.

◗Entity Type

EPSON Net! shows the printer’s Entity type on an AppleTalk network. You don’t have to set these options.

8.Click OK to send the new settings to the printer and return to the Summary dialog box. Click Update to send the new settings without closing the Configuration dialog box.

9.Click Exit.

You now need to install your printer driver and select your printer in the Chooser. See page 28 for instructions.

Installing the EPSON Status Monitor 2 Utility

Before you start, turn off all other active applications (such as virus protection).

If you’re using Windows NT, you need to log on as Administrator.

1.Insert the setup disk 1 of EPSON Status Monitor 2 in your diskette drive.

2.In Windows 95 or Windows NT 4.x, click Start and Run.

24