Caution:

If you have dial-up routers in a NetWare environment, they may automatically dial up the next hop and you may be charged for the line connection depending on the number of hops you set. To prevent this and to keep network traffic to a minimum, set hops carefully.

Setup Guide

In Windows NT 3.5x, choose Run from the File menu in the Program Manager.

3.Type A:\SETUP and click OK. If you’re not using drive A, substitute the appropriate letter.

4.Read the on-screen instructions and click Next.

5.Click Next, or if you want to change the destination directory, click Browse and select your directory.

If you’re using Windows 95, the following dialog box appears:

6.Select Yes to enable EPSON TCP/IP printing, and then click Next.

7.Select the type of printer(s) you want to monitor and click

Next.

8.Select Monitor to monitor EPSON network printers that do not have drivers installed in this computer. Select Do not monitor if network traffic is a problem. Then click

Next.

9.If you’re using NetWare, set the number of hops from 0 to 15 and click Next.

25