Setup Guide

Note:

To verify that the DLC protocol is installed correctly, check the list of installed Network Software in the Networks dialog box.

Installing DLC in Windows NT

Make sure Windows NT is running, and follow these steps to install DLC:

1.Open the Control Panel.

2.Double-click the Network icon.

3.In Windows NT 4.x, click the Protocols tab and then click

Add.

In Windows NT 3.5x, click the Add Software button.

4.In Windows NT 4.x, select DLC Protocol from the Select Network Protocol list, and click OK.

In Windows NT 3.5x, select DLC protocol from the Network Software list, and click OK.

5.Follow the instructions on the screen and reboot your system for the installation to take effect.

Configuring the Ethernet Card in Windows NT 4.x

After you have installed the DLC protocol, follow these steps to configure the card and your printer for Window NT 4.0:

1.Double-click My Computer, then double-click the

Printers icon.

2.Double-click the Add Printer icon.

3.Click My Computer, then click Next.

4.Click Add Port.

5.Select Hewlett-Packard Network Port, then click New Port.

20