Setup Guide

Configuring for TCP/IP

You can configure the Ethernet card for TCP/IP if you are using a UNIX TCP/IP network, a Windows 95 peer-to-peer network, or Windows NT.

Installing TCP/IP in Windows 95

Windows 95 does not come with LPR, so in addition to installing TCP/IP, as described below, you need to install the EPSON TCP/IP printer protocol. The EPSON Status Monitor 2 installer program automatically prompts you when to install EPSON TCP/IP printer protocol.

Follow these steps to install TCP/IP:

1.Open the Control Panel.

2.Double-click the Network icon.

3.If TCP/IP appears in the list of installed network components on the Configuration screen, you can skip to “Assigning the IP Address” on page 16. If TCP/IP does not appear in the list, click Add.

4.Click Protocol and then click the Add button.

5.Select Microsoft from the Manufacturers list and TCP/IP from the Network Protocols list. Then click OK.

6.Click OK again and follow any on-screen instructions to enable TCP/IP.

15