Setup Guide

Installing in Macintosh

1.Create a folder for EPSON Net! on your hard drive.

2.Insert the EPSON Net! for Macintosh installation diskette.

3.Copy the program from the disk to the folder.

After you install EPSON Net!, you use it to configure your printer for AppleTalk. See page 22 for instructions.

Configuring for NetWare

With NetWare, you can configure the printer as a print server, remote printer, or have it switch automatically between these two modes, depending on network conditions. Before you configure the printer, check the following:

◗Make sure Novell NetWare is set up to use print services on your network. See your NetWare documentation for details.

◗Decide whether you want to use the printer as a dedicated print server or as a remote printer, or whether you want to switch automatically between these two modes.

◗Make sure Bindery Emulation is selected. In PCONSOLE, press F4 to switch between Bindery Emulation and

Directory Services.

Note:

If you want to use your printer as a dedicated print server, skip to “Using EPSON Net! for NetWare Windows” on page 12.

Defining Your Printer on a Print Server

If you want to use your EPSON Stylus COLOR 800N as a remote printer, you must use PCONSOLE to define it on a NetWare print server. You then use EPSON Net! for NetWare to configure the operating mode and make other configuration changes.

10